Product Description

HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits. STORAGE & SHELF LIFE: One year when stored at *1℃ (*0℉)/*0% relative humidity out of direct sunlight. SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants. PRODUCT USE: It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between **0℃ ~ **0°C (**0℉ ~ ***5℉) technical data PRODUCT DESCRIPTION: A **5 micron (5.0 mil) high tensile strength aluminum foil backing, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper. FEATURES: • Aluminum backing provides excellent reflection of both heat and light. • High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application, • Low moisture vapor transmission rate makes T-S***0P an excellent vapor barrier. • Service Temperature range from **0℃～***0℃ （*4℉～***0℉） TYPICAL PHYSICAL PROPERTIES: Peel Adhesion to backing: *8N/*5mm (PSTC*1) Rolling Tack (*1mm ball): ≤*0 cm (PSTC*6) Holding Power: ***0+Min. (PSTC*7) Service Temperature ranger: **0°C ***0°C PRODUCT FORM & SIZE AVAILABLE: Cut Roll: *8 / *0mm (2") / *0 / *3mm (2.5") / *2 / *5mm (3") / *6mm / **0mm (4"). Log Roll: ***0mm x *5 / *0m Jumbo Roll: ***0mm x **0m ***** email: *****